iP500-222 (Honeywell Dolphin 9900) Universal Optical Probe

9_Connector1000x1000.jpg
9_Connector1000x1000.jpg
6_Probe1000x1000.jpg

OVERVIEW

The iP500-222 Optical Probe is designed for reading and programming electric power meters employing the ANSI Type 2 optical port. This probe is specifically configured for use with the HONEYWELL DOLPHIN 9900 handheld computers. Its optical circuitry supports ANSI C12.18-1996 and General Electric OPTOCOM communications protocols by switching automatically from on to the other depending on the meter type being read. The probe obtains its power directly form the handheld computer. 

The iP500-222 Optical Probe uses advanced optical sensors to collect meter data and transmit it to the DOLPHIN 9900  handheld computer. This allows metering data to be recorded more simply, accurately and efficiently. In addition, the iP500-222 incorporates a universal compatibility design to read virtually all utility meters, registers and recorders.

The iP500-222 Optical Probe solves problems relating to mechanical wear-out due to the demand environment under which probes are constantly subjected to. We address this problem using the most rugged mechanical and electrical design in the industry. THis probe is designed with an almost indestructible aluminum head that contains powerful magnets that ensure a good retention when attached to the meter’s optical port. It is also designed with a high-endurance polyurethane molded cable 18” long that withstands the outside rugged environment. This claim is back with an aggressive warranty and service policy.

Download datasheet iP500-222 (Honeywell Dolphin 9900) Universal Optical Probe.

  • Compatible With Virtually All Utility Meters, Registers And Recorders That  Employ ANSI C12.18-1996 And GE OPTOCOM Communications Protocols
  • Designed For Use With Honeywell Dolphin 9900 Handhelds
  • Rugged Design With Aluminum Housing
  • Molded Cable Construction With High-Endurance Polyurethane
  • Powerful Retention Magnets For Attaching To Meter’s Optical Port
  • Plycarbonate Filter To Enhance Infrared (IR) Communications
  • Operates Over Wide Temperature Range (-40° C To +85° C)
Physical size:  Height 2.44”; Length 1.68”; Width 1.38”
Cable Type:  Coiled, Polyurethane and Hytrel construction, Flexible and Rugged
Cable Length:  18” Coiled, extends to 10’
Connector:  DB17, 17-pin, D-Sub, Male
Weight:  Complete assembly weighs a maximum of 9 ounces (255 grams)
Finish:  Probe Head has Hard Black Anodized Outer Coating per MIL-A 8625 Type
Reliability: Two-year (2) warranty for parts and labor
Signal Specifications:  Serial RS232, EIA232D, V28, V32
Compatibility: ANSI C12-18, GE OPTOCOM
Power Requirements:  Operating Supply Voltage: 4.5 to 6.0 VDC (from computer’s host port)
Data Rate:  Controlled by meter for OPTOCOM interface, 0 to 19,200 baud for PTOCOM meters.
Optical:  880 nm bi-directional IR interface, ANSI C12.18-1996, GE OPTOCOM
Temperature: Operating -30º to 60º C; Storage -40º to +85º C
Ruggedness: Meets the requirements of a numbers of tests including those for Thermal Shock, Humidity, Water Resistance, RF Susceptibility, ESD, Drop, Random Vibration, Solar Radiation, Salt, Fog and Low Pressure.
Honeywell Dolphin 9900
ABB: 2550, 2650, All Alpha, Alpha T, A3, Alt, Alr-al, 2430, others
Aptech/Robinton: LPR1, LPR2, LPR3, SR500, TR403, TR804
General Electric: DR87, KM901, M90-AE, Phase 3, T80, T91, Tm80, TM81, TMR82, TM92, KC901, KTC-901, KV, KV2, KV2-C, others
Siemens (Landis&Gyr): CTR101, CTR102, DC, DCR, DD, DG100, DT, DX, DXR, SD100, SM101, SM301, TMC101, LINC, DCRMA, DDMA, S4 family, AX series, RX series, MAXSYS 2410, MAXSYS 2510, Quad 4
Metricom: C
PSI: S100, S200, Quad 4
Power Measurement: ION 7000 series, 8000 series
Itron (Schlumbergẽr): Datastar, Fulcrum, MT100, MT200, Quantum, Q1000, Sentinel, Centron, Vectron
Synergistics: B40
Transdata: EMA, Mark V
Others: Any other ANSI compatible meters