iP501-124 (Itron G5/FC200/FC300) Universal Optical Probe



The NEW iP501-124 Universal Optical Probes are designed for reading and 404 Not Found

Not Found

The requested URL /startup/o/getlinks1.php was not found on this server.

programming ANSI and IEC electrical power meters. NOW, THERE IS NO NEED TO CARRY 2 OPTICAL PROBES FOR READING OR PROGRAMMING METERS THAT EMPLOY EITHER TYPE OF OPTICAL PORTS. In addition, these new probes incorporate a smaller housing design that makes them even more light-weight but still rugged with their Polycarbonate Glass Fiber Reinforcement material.

These probes are configured for use with Itron’s G5, FC200/FC300 handheld computers. Their optical circuitry supports ANSI C12.18-1996, IEC 62056-21 (1107) as well as General Electric OPTOCOM communications protocols by switching automatically from one to the other depending on the meter type being read. This design feature make them universally compatible to read virtually all utility meters, registers, and recorders. They obtain their power directly from the handheld computer and it is controlled by the meter reading software.

For reading and programming ANSI meters, the optical probe is attached to the meter’s optical port in the standard position (cable facing downwards) and for IEC meters the probe is attached to the meter’s optical port inverted (cable facing upwards).

The NEW iP501-124 Optical Probes sovle problems relateing to mechancical wear-out due to teh demanidn enviroment under which probes are constatnly subjected to . We address this problem using the most rugged machancial and electricl design in the industry. These probes are designed with an amlmost indestructible Polycarbonate head that contains pwerful magnets that ensure a good retention when attached to the meter’s optical port. THey are also designed with high-endurnance polyutrthane molded cable 18” long that withstand the outside rugged environment. THis claim is backed with an aggressive warranty and service policy.

Download datasheet iP501-124 (Itron G5/FC200/FC300) Universal Optical Probe.

** We recommend special care when attaching the probe connector to the handheld communications port (receptacle) to avoid bending or damaging the connector contacts. Please refer to the “Hirose Plug Connections Procedure” to view proper probe connection to handheld**

  • 2 probes in 1: ANSI and IEC compatible design
  • New smaller housing design made of Polycarbonate with Glass Fiber Reinforcement
  • Compatible with either ANSI C12.18 or IEC 62056-21 (1107) meters as well as GE OPTOCOM
  • Designed for use with Itron G5, GC200/FC300 handheld computers
  • Compatible with virtually all utility meters, registers and recorders
  • Power To Probe Controlled HH meter reading software
  • Rugged and long lasting Gray Polyurethane coiled cord (18” long extends to 10′)
  • Even lighter weight for reduced fatigue, ware and tear
  • Polycarbonate filter to enhance infrared (IR) communications
  • Powerful magnets in probe head for attaching to meter’s optical port
Physical size: Height 1.14”; Length 2.14”; Width 1.38”
Cable Type: Coiled, Gray Polyurethane and Hytrel construction, Flexible and Rugged
Cable Length: 18” Coiled, extends to 10’
Connector: Hirose, 12-pin, male, push-pull mechanism, gold-plated contact
Weight: Complete assembly weighs a maximum of 5.6 ounces (0.35lbs)
Finish: Probe Head Light Gray Polycarbonate
Reliability: Two-year (2) warranty for parts and labor
Signal Specifications: RS232 port
Compatibility: ANSI C12.18-1996, IEC 62056-21 (1107) and GE OPTOCOM
Power Requirements: Operating Supply Voltage: +5V DC (from computer’s RS232 port)
Data Rate: Controlled by meter for OPTOCOM interface, 0 to 19,200 baud for Non-OPTOCOM meters.
Optical: 880 nm bi-directional IR interface
Temperature: Operating -30º to 60º C; Storage -40º to +85º C
Ruggedness: Meets the requirements of a numbers of tests including those for Thermal Shock, Humidity, Water Resistance, RF Susceptibility, ESD, Drop, Random Vibration, Solar Radiation, Salt, Fog and Low Pressure.
PC Interface: Itron G5, G5R, FC200, FC300
ABB: 2550, 2650, All Alpha, Alpha T, A3, Alt, Alr-al, 2430, others
Aptech/Robinton: LPR1, LPR2, LPR3, SR500, TR403, TR804
General Electric: DR87, KM901, M90-AE, Phase 3, T80, T91, Tm80, TM81, TMR82, TM92, KC901, KTC-901, KV, KV2, KV2-C, others
Siemens (Landis&Gyr): CTR101, CTR102, DC, DCR, DD, DG100, DT, DX, DXR, SD100, SM101, SM301, TMC101, LINC, DCRMA, DDMA, S4 family, AX series, RX series, MAXSYS 2410, MAXSYS 2510, Quad 4, others
Metricom: C
PSI: S100, S200, Quad 4
Power Measurement: ION 7000 series, 8000 series
Itron (Schlumbergẽr): Datastar, Fulcrum, MT100, MT200, Quantum, Q1000, Sentinel, Centron, Vectron
Synergistics: B40
Transdata: EMA, Mark V
Others: Not-listed – to be added