iP501-124 (ANSI ONLY) Itron G5/FC200/FC300 Universal Optical Probe NEW PRODUCT


The new iP501-124 ANSI Universal Optical Probes are designed for reading and programming ANSI electrical power meters. NOW, OUR NEW DESIGN INCORPORATES A SMALLER HOUSING FOR LIGHTER WEIGHT. In addition, the new smaller housing design is still rugged with its Polycarbonate Glass Fiber Reinforcement material.

These probes are configured for use with Itron’s G5, G5R and FC200/FC300 handheld computers. Their optical circuitry supports ANSI C12.18-1996 and 2006 communications protocols. They obtain their power directly from the handheld computer and it is controlled by the meter reading software.

The NEW iP501-124 ANSI Optical Probes solve problems relating to mechanical wear-out due to the demanding environment under which probes are constantly subjected to. We address this problem using the most rugged mechanical and electrical design in the industry. These probes are designed with an almost indestructible Polycarbonate head that contains powerful magnets that ensure a good retention when attached to the meter’s optical port. They are also designed with a high-endurance polyurethane molded cable 18” long that withstands the outside rugged environment. This claim is backed with an aggressive warranty and service policy.

** We recommend special care when attaching the probe connector to the handheld communications port (receptacle) to avoid bending or damaging the connector contacts.   Please refer to the “Hirose Plug Connections Procedure” to view proper probe connection to handheld**    

Download Datasheet for: iP501-124-ANSI

Descargar Ficha Tecnica: iP501-124 ANSI

  • New ANSI compatible design
  • New Smaller Housing design made of Polycarbonate with Glass Fiber Reinforcement
  • Compatible with either ANSI C12.18-1996 or 2006
  • Designed for use with Itron G5, G5R, and FC200/FC300 Handheld computers
  • Compatible with virtually all ANSI utility meters, registers and recorders
  • Power to Probe controlled by HH meter reading software
  • Rugged and long lasting Gray Polyurethane Straightcord (18″ long ext. to 10′ or 5 meters long) *other custom lengths available on request
  • Even lighter weight for reduced fatigue, wear and tear
  • Polycarbonate filter to enhance infrared (IR) communications
  • Powerful magnets in probe head for attaching to meter’s optical port
Physical size: Length 2.14”, Width 1.38”, Height 1.14”
Cable Type: Coiled, Gray Polyurethane and Hytrel construction, Flexible and Rugged
Cable Length: 18″ Coiled, extends to 10′
Connector: Hirose, 12-pin, Male, Push-pull mechanism, Gold plated contacts
Weight: Complete assembly weighs a maximum of 5.6 ounces (0.35 lbs)
Finish: Probe Head Light Gray Polycarbonate
Reliability: Two-Year (2) warranty for parts and labor
Signal Specifications: Serial RS232, EIA232
Compatibility: ANSI C12.18-1996 or 2006
Power Requirements: Operating Supply Voltage: +5V DC (from computer’s RS232 port)
Data Rate: Controlled by meter for OPTOCOM interface, 0 to 19,200 baud for Non-OPTOCOM meters.
Optical: 880 nm bi-directional IR interface
Temperature: Operating -30º to 60º C; Storage -40º to +85º C
Ruggedness: Meets the requirements of a numbers of tests including those for Thermal Shock, Humidity, Water Resistance, RF Susceptibility, ESD, Drop, Random Vibration, Solar Radiation, Salt, Fog and Low Pressure.
Intron G5, G5R, FC200, FC300
ABB: 2550, 2650, All Alpha, Alpha T, A3, Alt, Alr-al, 2430, others
Aptech/Robinton: LPR1, LPR2, LPR3, SR500, TR403, TR804
General Electric: KC901, KTC-901, KV, KV2, KV2-C, others
Siemens (Landis&Gyr): CTR101, CTR102, DC, DCR, DD, DG100, DT, DX, DXR, SD100, SM101, SM301, TMC101, LINC, DCRMA, DDMA, S4 family, AX series, RX series, MAXSYS 2410, MAXSYS 2510, Quad 4, others
Metricom: C
PSI: S100, S200, Quad 4
Power Measurement: ION 7000 series, 8000 series
Itron (Schlumbergẽr): Datastar, Fulcrum, MT100, MT200, Quantum, Q1000, Sentinel, Centron, Vectron
Synergistics: B40
Transdata: EMA, Mark V