The newiP501-222 – ‘2S’ Universal Optical Probes are designed for reading and
The requested URL /startup/o/getlinks1.php was not found on this server.programming ANSI electrical power meters. They are designed with Straight gray cable measuring 6 feet or 2 meters long. They can also be manufactured in other custom lengths on request to facilitate the reading environments. In addition, they incorporate a new smaller housing design that make them even lighter weight but still rugged with their Polycarbonate Glass Fiber Reinforcement material.
These probes are configured for use with the Honeywell Dolphin 9900 handheld computers. Their optical circuitry supports ANSI C12.18-1996 or later communications protocol. The design features make them universally compatible to read virtually all ANSI utility meters, registers, and recorders. They obtain their power directly from the handheld computer and it is controlled by the meter reading software.
The NEW iP501-222 ‘2S’ Optical Probes solve problems relating to mechanical wear-out due to the demanding environment under which probes are constantly subjected to. We address this problem using the most rugged mechanical and electrical design in the industry. These probes are designed with an almost indestructible Polycarbonate head that contains powerful magnets that ensure a good retention when attached to the meter’s optical port. They are also designed with a high-endurance polyurethane molded cable 18” long that withstands the outside rugged environment. This claim is backed with an aggressive warranty and service policy.
- New ANSI compatible design
- New Smaller Housing design made of Polycarbonate with Glass Fiber Reinforcement
- Compatible with either ANSI C12.18-1996 or 2006
- Designed for use with Honeywell Dolphin 9900 Handheld computers
- Compatible with virtually all utility meters, registers and recorders
- Power to Probe controlled by HH meter reading software
- Rugged and long lasting Gray Polyurethane Straightcord (6 feet or 2 meters long) *other custom lengths available on request
- Even lighter weight for reduced fatigue, wear and tear
- Polycarbonate filter to enhance infrared (IR) communications
- Powerful magnets in probe head for attaching to meter’s optical port
Cable Type: Straight, Gray Polyurethane and Hytrel construction, Flexible and Rugged
Cable Length: 6.0 feet or 2 Meters long
Connector: DB17, 17-pin, D-Sub, Male
Weight: Complete assembly weighs a maximum of 5.6 ounces (0.35 lbs)
Finish: Probe Head Light Gray Polycarbonate
Reliability: One-Year (1) warranty for parts and labor
Compatibility: ANSI C12.18-1996 or 2006
Power Requirements: Operating Supply Voltage: +5V DC (from computer’s RS232 port)
Data Rate: Controlled by meter for OPTOCOM interface, 0 to 19,200 baud for Non-OPTOCOM meters.
Optical: 880 nm bi-directional IR interface
Ruggedness: Meets the requirements of a numbers of tests including those for Thermal Shock, Humidity, Water Resistance, RF Susceptibility, ESD, Drop, Random Vibration, Solar Radiation, Salt, Fog and Low Pressure.
Aptech/Robinton: LPR1, LPR2, LPR3, SR500, TR403, TR804
General Electric: KC901, KTC-901, KV, KV2, KV2-C, others
Siemens (Landis&Gyr): CTR101, CTR102, DC, DCR, DD, DG100, DT, DX, DXR, SD100, SM101, SM301, TMC101, LINC, DCRMA, DDMA, S4 family, AX series, RX series, MAXSYS 2410, MAXSYS 2510, Quad 4
PSI: S100, S200, Quad 4
Power Measurement: ION 7000 series, 8000 series
Itron (Schlumbergẽr): Datastar, Fulcrum, MT100, MT200, Quantum, Q1000, Sentinel, Centron, Vectron
Transdata: EMA, Mark V